Drive Shaft Assembly for the Koenig LR591 crank driven winch.
There are 2 lenghts (longer one for 88'' & 109'' vehicles, and shorter ones for 86'' ...

For sale is a Koenig L621 Setup for Series Landrovers. The winch was rebuild with many new parts, like the winches mounting assembly, the drum shaf...

For sale is a Koenig L621 Setup for Series Landrovers. The winch was rebuild with many new parts, like the winches mounting assembly, the drum shaf...

For sale is a Koenig L621 Setup for Series Landrovers. The winch was rebuild with many new parts, like the winches mounting assembly, the drum shaf...

10mm - 25 Meter Winch Rope MBL 7120 kg.
Other Diameters and lenghts available, please send me an e-mail for prices.

Universal Joint for the Koenig L621 PTO Winches.

Drive Line Parts for the Turner Mini Winch.
 
This set contains:
 
- Assy Sleeve and shaft - DWG 6906
- Spring - EWG 6765
- Shaft - Sliding End - C...

Clutch Lever for the Turner Mini Winch.

2 new slippers for the tuner winch.

Four bush bearings for the horizontal rollers of the Tuner Mini Winch.

Bush bearing for main shaft of the Turner Mini Winch.

Thrust Bearing for the Turner 'Mini Winch' MK V

Pivot plate for the Turner Mini Winch.

Used Warn 8274 - the holy grail of winches.
I bought this winch as reconditionned.

Fairey Drum Winch setup for the Series 2 & 3 Landrover.
Without PTO, Drive Line, Rollers.

Mayflower drum winch with a used rope. Was fitted to the rear crossmember of a 101 landrover. I can also supply a front or rear pto drive for eithe...

Fairey Drum Winch for the Series Landrover as pictured.
The oil seal for the rear output shaft has not yet been fitted. You will have to find one t...

Fairey Drum Winch for the Series Landrover. Used condition.

Koenig R-101 Winch in used condition.

For sale is this used Fairey Drum Winch Setup for the early 110 / 90 landrovers.

I have one H14 Superwinch for 90 / 110 Landrover Defender TD5 with Lt230 transfer box for sale.
This set contains a recon winch and power take off ...

I have one H14 Superwinch for 90 / 110 Landrover Defender with Lt230 transfer box for sale.
This set contains a recon winch and power take off unit...

I have one H14 Superwinch for 90 / 110 Landrover Defender with Lt230 transfer box for sale.
This set contains a recon winch and power take off unit...

Harvey Frost Crane for Landrover recovery vehicle.
 

MONUMENTAL SPEC 17,500 lb
24 Month Warranty  
12V Heavy Duty Wireless Remote Control Recovery Winch.    
Fitted with our new 13mm 'ArmourLite' Synt...

MONUMENTAL SPEC 17,500 lb
24 Month Warranty   12V Heavy Duty Wireless Remote Control Recovery Winch.
Incredible 17,500lb (almost 8 tonnes) straight...

Heavy duty recovery winch 12v  
24 Month Warranty  
Included In Price = Twin handset Wireless Remote.
UPGRADED TO 13,500lb (Almost 7 tonnes) wtith ...

12V Electric winch rigged with 28m UHMWPE  11mm / 12 strand synthetic rope.    
Twin Handset Wireless Remote FITTED AS STANDARD ON THIS MODEL  
Gen...

Heavy Duty 4x4 / Recovery Winch 12v    
Please note The Synthetic Rope & Hook was upgraded To the "ARMOURLITE" Grey SYNTHETIC ROPE MODEL.
24 Month ...

Original used, glass bead cleaned winch fitting plate. This is used to fit a Warn 8274 Winch to a Series Landrover.

Very nice quality winch bumper reproduction by Winchmax; heavy duty, laser cut & powdercoated in graphite black.
Pre drilled (114mm x254mm) to take...

Motor Connection Flange for the LR591 and LR 592 Koenig Winches

1 x Mounting cage for the Koenig L621 PTO Winches.
Sprayed in Black or in Gray primer.

Platform Clamp Bolt - including nut and lock washer.

1 x Koenig L621 Drive Shaft Assembly

This is the shaft bearing for the L621 Koenig winch. Without the bracket.
You can use this bracket as an alternative: 6384 + 8127-A4

Shifter Assembly for the Koenig L621 Winches - NOS

One NOS Drum for the Koenig L621 Winch.

Bushing for the L621 Winch Drum. You require 2 of these.

Bushing for the L621 Winch Housing. You require 2 of these.

Bushing for the L621 Winch Housing. You require 2 of these.

Drum Set Collar for the Koenig PTO Winch.

Drum Clutch for the koenig L621 Winch.

Worm shaft for the L621 Koenig PTO Winch.

Gasket Set for the Koenig PTO Winch.

Replacement drum shaft for the Koenig L621 Winch.

Koenig Winch Drum Shaft Bracket & Bushing
Other Koenig Spare Parts available - please ask.

Thrust Bearing for the L621 Koenig Winch.

Oil Seal for the Koenig L621 Winch.

Fairey Winches Wheel Chocks. Foldable. 
These where sold by Fairey Winches to use with their Drum or Capstan Winches.
I got several ones in various...

Fairey Winches Wheel Chocks. Foldable. 
These where sold by Fairey Winches to use with their Drum or Capstan Winches.
I got several ones in various...

Replacement drive shafts for all (Fairey / Superwinch) Series and Defender Drum Winches. The shafts are about 1 meter each, so you can cut them to ...

Fairey / Superwinch Drum Winch - Bracket + Baring Location Plate

Replacement Universal Joint for the Fairey, Mayflower and H14 Superwinches. 
 

Original used Fairey Pay-On Lever and Pivot.

One reproduction Fairey Winches Label.

One Genuine Ball Bearing for the H14 Superwinch.
You require 2 of these for one winch.

1 Genuine Spherical Plain Bearing as used on the H14 Superwinch.

One Genuine needle roller bearing for the H14 Superwinch.
You require 2 of these bearings for one winch.

One Genuine H14 Superwinch Oil Seal.  
You require 1 of these seals for one H14 Winch.

One Genuine H14 Superwinch Oil Seal.
You require 1 of these seals for one H14 Winch.

One Genuine O ring for the H14 Superwinch.

One cover gasket for the H14 Superwinch.
 

One Gasket for the H14 Superwinch (wormshaft cover).

One Genuine Thrust Washer for the H14 Superwinch.
You require 2 for one winch.
 

One key for the H14 Superwinch drive line.
The PTO shaft kit for the 4 cylinder 110/90 contain 7 keys, the V8 shaft kits contain 6 keys.

GKN Universal Joint 'cross' H14 Superwinch Drive Line
All models.

1 x Self Aligning Flange Bearing H14 Superwinch drive line.
For use on 90/110/127 Defender 4 cyl (inc. TDi) up to V.I.N. 939976)

1 Face seal for the H14 Winch (dust seal, V-Ring) - please note you will require 2 for 1 H14 winch.

A glass bead blasted worm box and worm box cover for the Fairey / Superwinch PTO winches.

A genuine universal joint with a nos gkn cross. These where used on the Series and Defender Drum Winches (Fairey / Superwinch).
This one was glass ...

GKN Universal Joint 'cross' Fairey Drum Winch Drive Line
All models.

1 x Self Aligning Flange Bearing Fairey Drum Winch drive line.

Hexagon Stub shaft used on the H14 drive lines and other Fairey/Superwinch Drum winch drive lines.

One re manufactured Press Steel Flange Bearing for the Fairey / Superwinch Drum Winches (series kit 6920).
 

One Oil Seal for the Fairey / Superwinch Drum winches.  
You require 1 of these seals per winch.

One Oil Seal for the Fairey / Superwinch Drum Winches.  
You require 1 of these seals per winch.

One Genuine Key for the Fairey / Superwinch Drum Winches (Series and Defender)
You require 2 per winch.

One key for the Mayflower Drum Winch drive line.
You require 5 in total.

One Genuine Socket head setscrew for the Fairey / Superwinch Drum Winches (Series and Defender).
You require 4 per winch.

One Genuine Socket Set Screw from the Fairey / Superwinch Drum Winches.
The Defender Winches require 16 of these, the series winches (6920 & Mayflo...

One Genuine circlip for the Fairey / Superwinch drum winches.
You require 8 of these for one winch.

Genuine Relief valve for the Fairey, Mayflower and Superwinch winches (series and defender Models).

Used Fairey /Superwinch Winches 525 Label.

One re manufactured Ball Bearing for the Fairey / Mayflower Drum Winches.

One re manufactured Ball Bearing for the Fairey / Mayflower Drum Winches.
You require 2 for one winch.

One re manufactured Ball Bearing for the Fairey / Mayflower Drum Winches

This is an original ball bearing for the Fairey / Mayflower Drum winches.

One re manufactured needle roller bearing for the Fairey / Mayflower drum winches.

One re manufactured oil seal for the Mayflower Drum Winch.

One re manufactured oil seal for the Fairey / Mayflower Drum Winches.

Re manufactured plumber block (bearing) and packing plate for the Mayflower Winch Drive Line.

One key for the Mayflower Drum Winch drive line.
You require 5 in total.